Husqvarna TC300 2025

BODYWORK

Clean, Swedish-inspired design and ergonomics are tailored to allow riders to perform at their best for extended periods of time. Adapted after countless hours of testing, the contact points and surfaces in the rider triangle improve comfort on the motorcycle. A new, flatter seat offers unrestricted movement with a high grip cover ensuring riders stay firmly in place under hard acceleration.​

FRAME

For 2025, the frame around the shock mount and steering head has less material, with revised wall thickness in higher stress areas improving overall strength. Together, these changes reduce the weight of the frame by 300 g for improved cornering, unparalleled rider feedback, energy absorption, and exceptional straight-line stability. The frame is finished with a premium metallic blue powder coating with frame protectors offering superior protection, durability, and grip in any condition.​

ENGINE

The fuel-injected, 300 cc engine offers the best combination of unrivalled peak power and usable torque. Lightweight in construction, the engine design centralises mass, which plays a vital role in the handling and agility of the new machine. An electronic exhaust control system tailors the power in every gear to ensure maximum performance on every part of the race track. The new TC 300 57hp engine is easy to maintain, with clear markings on the engine covers indicating where to check the gearbox oil level, as well as where to drain the coolant from.

SUSPENSION

Revised for the updated frame and lower in weight, the WP XACT rear shock offers 293 mm of travel. Inside is a Computational Fluid Dynamics (CFD) optimised main piston for improved initial comfort that provides strong hold-up in all conditions. The linkage system also features updated, lower friction seals while a new linkage bolt saves weight. Rebound and high and low speed compression settings can be easily adjusted by hand to simplify any set-up changes.

CYLINDER

With Electronic Fuel Injection (EFI) as standard on the TC 300, the traditional powervalve is replaced with an electronic exhaust control system. This highly innovative technology manages the opening of the lateral exhaust ports before the main exhaust ports open to deliver strong, controllable power. The upper contour of the exhaust port features a machined finish for improved port timing and unrivalled performance.​

CRANKSHAFT

The crankshaft is designed with weight reduction in mind to increase throttle response. The perfect balance of rotating masses is achieved by balancing the weights of the crankshaft flywheel, the rotor, and the counter balancer shaft.​

CRANKCASES

​

COUNTER BALANCER SHAFT

The TC 300 features an innovative laterally mounted counter balancer shaft. This shaft significantly reduces engine vibration, resulting in a smoother and more comfortable ride.​

DDS CLUTCH

The damped diaphragm steel (DDS) clutch fitted to the TC 300 is unique as a single diaphragm steel pressure plate is utilised instead of traditional coil springs. Housed inside a CNC machined steel basket, the overall clutch design contributes to the compact engine layout and features a damping system for improved traction and durability.​

GEARBOX

The TC 300 features a 5-speed gearbox manufactured exclusively by Pankl Racing Systems for the highest level of durability and ensures smooth and precise shifting. The gear lever tip design offers improved leverage and prevents dirt build-up, even in the toughest conditions.

SUBFRAME

Made from 60% polyamide and 40% aluminium, the new two-piece subframe for 2025 ensures exceptional strength and durability at an overall weight of just 1.8 kg. The lower subframe spars and frame mounts are manufactured from cast aluminium for significantly improved reliability. The upper section of the subframe is made from injection-moulded polyamide to enable specific flex characteristics and ensure a lightweight construction.

TRIPLE CLAMPS

Matching the new frame design and suspension set-up, the CNC-machined triple clamps provide precisely calculated geometry for increased stability. Customised handlebar flex can be achieved by the new handlebar clamp which offers two mounting options – rubber-damped for less vibration or fixed for enhanced front-end feedback. The upper triple clamp is stiffer to ensure a smoother fork action and plays a vital role in the perfect alignment of the front wheel for superior handling.

SWINGARM

The new hollow die-cast aluminium swingarm is manufactured from a single piece of aluminium using an improved die-cast production process for optimal stiffness and a 190 g weight reduction over previous versions. In order to optimise and match the flex characteristics from the new frame, a new 22 mm rear axle is fitted. Additionally, the chain guard and chain slider have been completely redesigned for improved durability and are less prone to hooking on external objects.

AIRBOX

Designed with precisely positioned inlet ducts aimed at reducing drag and air flow deformation, the airbox ensures unrestricted airflow with maximum filter protection. The TWIN AIR filter is easily accessed without tools, by simply removing the left side panel for easy maintenance.

HYDRAULIC CLUTCH

The high-performance Brembo hydraulic clutch system guarantees even wear, near maintenance-free operation and perfect modulation in every condition. Meaning that play is constantly compensated so that the pressure point, and function of the clutch remain identical in cold or hot conditions, as well as over time. Countless hours of race-focused testing have proven the high-quality, Italian-made Brembo hydraulic systems’ exceptional reliability.

HYDRAULIC BRAKES

The highest level of quality is guaranteed with class-leading Brembo callipers made from single pieces of aluminium for strength at the lowest possible weight. Together with a redesigned 260 mm front and a 220 mm rear disc which offer improved dirt removal, superior stopping power and braking confidence is guaranteed in all conditions.

PROTAPER HANDLEBAR

Developed between Husqvarna Motorcycles and leading handlebar manufacturer, ProTaper, the exclusive bend offers superior comfort, class-leading strength, and fatigue resistance at the lowest possible weight.

ODI GRIPS

ODI lock-on grips feature an innovative integrated throttle mechanism and a glue-free installation. The throttle assembly offers easy free-play adjustment with the option to fit alternative cams for a personalised throttle action.

FOOTRESTS

All-new, CFD-designed footrests offer a 26.8% larger contact area to ensure better control of the machine while being less susceptible to hooking on deep ruts, take-offs when scrubbing, or trackside barriers. This was achieved by a new, narrower mounting design in the frame layout, which also helps reduce overall weight.

WHEELS AND TYRES

Assembled with CNC-machined hubs, lightweight spokes, and strong, black-anodised alloy rims by D.I.D, the wheels of the TC 300 offer strength and minimal unsprung weight. New, Dunlop Geomax MX34 Motocross tyres are fitted and feature a proven block-within-a-block design for enhanced control and superior grip on a variety of riding surfaces.​

EXHAUST SYSTEM

The header pipe on the TC 300 is designed using innovative 3D modelling. The result is a perfect shape aimed at delivering the optimum performance characteristics while also being very compact ensuring sufficient clearance in tight rutted corners.

COOLING SYSTEM

Manufactured from high-strength aluminium, the radiators are designed using Computational Fluid Dynamics (CFD) to channel air in the most effective way. A large centre tube channels coolant through the frame to reduce pressure at this point in the system for a more consistent flow while a new internal thermostat further enhances reliability.

FUEL TANK

A new 7.2 litre fuel tank integrates neatly into the revised bodywork. Due to the new fuel pump design and position, the tank is emptied further for increased running times. For improved safety, the external fuel line is specifically routed to make it less exposed and susceptible to damage.

EFI

The introduction of Electronic Fuel Injection on the TC 300 brings many benefits. The ECU from Vitesco constantly analyses the running condition of the engine and delivers the perfect air/fuel ratio at all times through the state-of-the-art 39 mm Keihin throttle body. The exciting addition of EFI allowed our engineers to develop two different engine maps, which can easily be selected via the handlebar-mounted switch for a personalised riding experience. Additionally, an important reed valve revision improves intake tract sealing and prevents excess fuel build up in the engine on extreme up or downhill sections for clean running at all times.

E-START

For guaranteed, easy starting in all conditions, the TC 300 now features highly convenient electric start technology for the very first time. The reliable system removes the need for a kickstart completely. The 12,8V 2 Ah Lithium-Ion battery is positioned neatly under the seat and close to the centre of gravity for uncompromised handling. Stopping of the engine is now achieved via the same handlebar-mounted switch for improved ease of use and a simplified operation.

MAP SWITCH

Adding Electronic Fuel Injection (EFI) to the TC 300 allows for the introduction of two engine maps that cater for riders of all abilities. Map 1 is the standard option, that delivers linear, predictable power, while map 2 is aggressive with improved throttle response and a sharper, explosive power output. By simply pressing a button on the handlebar-mounted map switch, riders can toggle between the two options and select their chosen map.

EMS

The new Engine Management System (EMS) is designed to be smaller and lighter while also faster at processing data. It incorporates a new rollover sensor (ROS) which cuts the ignition and shuts off the engine for safety in the event of a severe crash, adding another level of safety to Husqvarna Motorcycles’ new generation motocross line-up.

HOUR METER

A new hour meter comes with an integrated fuel level indicator which is visible on the FI status LED, indicating to the rider when the fuel level is becoming low.

START/STOP SWITCH

The new combined start/stop switch is located on the right side of handlebar for easy, thumb-operated use. Not only simplify the starting and stopping of the engine, the removal of a designated stop only button from the handlebar reduces the risk of potential damage or activation in the event of a fall.